Gingival Retraction for Crowns: Cord, Paste, Lasers and Rotary Curettage
In 2012, a Townie described spending up to 10 minutes placing retraction cord, only to have it slip out before the impression. More than a decade later, Townies are still debating whether cord, retraction paste, lasers or ceramic burs offer the most predictable results. Scanners have replaced impression trays in many practices, yet exposing the entire restorative margin without damaging surrounding tissue remains a challenge.
Conventional cord still has an advantage when working with deep subgingival margins. A 2021 systematic review in the Journal of Prosthetic Dentistry found that cord generally produced greater displacement than cordless techniques, while a 2019 meta-analysis in Quintessence International found that paste performed better on several measures of periodontal health. In a 2020 randomized trial, Bennani and colleagues measured average horizontal displacement of 282 microns with cord and 241 microns with aluminum chloride paste. Both exceeded the commonly cited 200-micron benchmark for conventional impressions. In a 2018 multicenter trial, minor gingival recession occurred in 8% of teeth treated with paste alone, 23% with cord and paste, and 32% with double cord, although laboratory technicians found dies easier to prepare with double cord.
A 2025 systematic review in the European Journal of Prosthodontics and Restorative Dentistry found that subgingival margins and saliva contamination compromised scanning accuracy, while cord improved it. Conventional impression materials can flow into a sulcus that an optical scanner cannot see. Dr. Eric Block addresses this by scanning the preparation first, magnifying the image and selectively placing cord wherever additional exposure is needed. Supragingival margins, whenever clinically appropriate, simplify scanning and reduce the risk of encroaching on the supracrestal tissue attachment.
Several Townies prefer the term cord placement to cord packing, emphasizing precision over force. Dr. Michael Melkers and others recommend looping the cord around the tooth after breaking proximal contacts, before final margin refinement. Angle the instrument toward the root, gently roll the cord into the sulcus and direct pressure toward the previously placed segment to avoid pulling it out. Select cord diameter according to sulcular anatomy and aim for lateral displacement rather than apical penetration. Begin with healthy tissue whenever possible. For shallow margins, aluminum chloride paste with a compression cap may suffice, while deeper margins may require single or double cord. Persistent pain or bleeding warrants reassessment rather than additional force.
Rotary gingival curettage, described by Dr. Rex Ingraham in 1981, has resurfaced as a cordless alternative. Yet a 2023 study by Rada Kazakova and colleagues found that ceramic bur curettage produced 0.307 mm of average recession after two weeks, approximately 2.5 times that of cord. Diode and Er:YAG lasers produced less recession than cord in the same study, and a 2024 clinical trial by Vipul Diwan and colleagues found that diode lasers also caused less patient discomfort. These studies support selective laser use but cannot establish long-term superiority or justify routinely removing healthy tissue to expose a margin.
Laboratory studies in the Journal of Adhesive Dentistry in 2022 and BMC Oral Health in 2024 indicate that both ferric sulfate and aluminum chloride can interfere with dentin bonding, depending on the adhesive and cleaning protocol. The American Dental Association discourages epinephrine-impregnated cord in patients with uncontrolled hypertension. Count every cord placed and removed before dismissal, as retained fibers can provoke chronic inflammation. When evaluating a new technique, track more than preparation time. Impression retakes, laboratory remakes, seating adjustments, postoperative discomfort and gingival health at recall reveal whether a faster appointment actually produces better dentistry.
Would your next crown need retraction if you placed the margin differently?
Join the Conversation!

Systematic reviews and comparative evidence
Conventional cord versus cordless techniques for gingival displacement
https://pubmed.ncbi.nlm.nih.gov/32008797/
Influence of gingival retraction paste versus cord on periodontal health
https://pubmed.ncbi.nlm.nih.gov/30773575/
Accuracy of intra oral scanners for full crown tooth preparations with subgingival margins
https://pubmed.ncbi.nlm.nih.gov/39887301/
Effect of contamination and decontamination methods on the bond strength of adhesive systems to dentin
https://pubmed.ncbi.nlm.nih.gov/37395344/
Clinical trials on cord, paste, lasers, and rotary curettage
A randomized controlled clinical trial comparing the use of displacement cords and aluminum chloride paste
https://onlinelibrary.wiley.com/doi/full/10.1111/jerd.12581
A multicenter randomized, controlled clinical trial comparing the use of displacement cords, an aluminum chloride paste, and a combination of paste and cords for tissue displacement
https://pubmed.ncbi.nlm.nih.gov/28478985/
Trueness of intraoral scanners according to subgingival depth of abutment for fixed prosthesis
https://pubmed.ncbi.nlm.nih.gov/36456561/
Comparative evaluation of the effect of impregnated retraction cord versus laser on gingival attachment level and pain perception following retraction for subgingival margins
https://pmc.ncbi.nlm.nih.gov/articles/PMC11129809/
Comparative evaluation of gingival displacement and inflammatory response using different retraction techniques
https://pmc.ncbi.nlm.nih.gov/articles/PMC12659889/
A comparative analysis of post retraction changes in gingival height after conventional and surgical gingival displacement, rotary curettage, diode and Er:YAG laser troughing
https://pmc.ncbi.nlm.nih.gov/articles/PMC10454077/
Evaluation of gingival displacement, bleeding and ease of application for polytetrafluoroethylene, PTFE, and conventional retraction cord
https://pubmed.ncbi.nlm.nih.gov/37013740/
Hemostatic agents, bonding, and restorative implications
The effect of hemostatic agents and dentin cleansing protocols on shear bond strength of resin composite using universal adhesive
https://pmc.ncbi.nlm.nih.gov/articles/PMC11577673/
Contamination of dentin with hemostatic agents, is EDTA a valuable decontaminant before using a self etch universal adhesive
https://pmc.ncbi.nlm.nih.gov/articles/PMC11734322/
Medical safety and clinical guidance
Epinephrine absorption from commercial gingival retraction cords in clinical patients
https://pubmed.ncbi.nlm.nih.gov/1432796/
Hypertension
https://www.ada.org/resources/ada-library/oral-health-topics/hypertension
Product reference
Astringedent, 15.5% ferric sulfate
https://www.ultradent.com/products/categories/indirect-restorative/hemostatics/astringedent