Blog Posts

Category:
Displaying 26-50 of 134
1 2 3 4 5
Page 2 of 6
The Patient First Podcast Episode 103: Welcome to Dentistry 3.0
Dentistry has seen phenomenal improvement over the past few decades, but the best is yet to come. In fact, it’s almost here. In this episode of The Patient First Podcast, I explain “Dentistry 3.0,” the next big stage of development for dentistry as a profession.  This episode also discusses the...  Read More
Digital Imaging and Radiography Digital imaging and radiography have replaced traditional film-based methods, offering numerous advantages. Digital X-rays provide instant results with lower radiation exposure, making it safer for both patients and dental professionals. These images can be...  Read More
The Patient First Podcast Episode 83: The Top 4 Tech Tools Dentistry Needs Right Now
This list of the top four technological advances in dentistry to keep an eye out for in 2023 just might surprise you… The dental industry as a whole is way behind the times when it comes to applied technology. When equipped with the right tools, however, dentists can empower their patients and...  Read More
Read This Before You Buy a Used CEREC (2023 Update)
This is the third installment of the  that I wrote more than seven years ago. Many tens of thousands of views later, it has become the most popular writing about used CERECs on the Internet! If you are in the market for a used CEREC system, be sure to read this article in its entirety as I'm going...  Read More
Categories: CAD-CAM
Honest, Affordable, Quality Dentistry with Dr. Josh Wyatt
Good morning and welcome back to the Dental Lab Podcast. I'm Bob Brandon, the general manager here at Keating Dental Lab, and today we are honored to have Dr. Josh Wyatt from South Tampa Dentistry. Dr. Wyatt, good morning. Hey, good morning, Bob. How.  We're rolling right along here. We're super...  Read More
Cerec milling burs
Cerec milling burs Dental care and the medical procedures that are related to it has gone through an un – precedented jump in the technology, methods and recovery time for patients. In present days, some countries in the world are becoming more famous for their dental treatment and technological...  Read More
Categories: CAD-CAM
Everything Removable + Keating'$ Customer $ervice
On this episode of the Dental Up Podcast, we sit down with Alex Castanedo of the Removable and Customer Service teams here at Keating Dental Lab. We provide tips on impression taking and bite registrations for removable prosthetics, and discuss orthotics and dental sleep apnea appliances....  Read More
Innobyte - Bite Force Measurement
On this episode of the Dental Up Podcast, we sit down with Frederik Marcil, President, CEO, and Founder of Kube Innovations, and the engineer of the Innobyte.  Today he provides a quick overview of the technology and discusses how bite force is a new biometric standard.  We also discuss how bite...  Read More
CAD/CAM Dentistry with Dr. Chip Parrish
  On this episode of the Dental Up Podcast, we sit down with Dr. Chip Parrish:  he practices with his wife Dr. Jennifer Parrish in the heart of the beautiful Texas hills country.  Parrish Dentistry provides most types of dental treatment from orthodontics to endodontics, from implant dentistry to...  Read More
Frost Dental Group - 70 Years Strong!
On this episode of the Dental UP Podcast, we interview Dr. Lee Frost, owner of Frost Dental Group, which has been in business continuously for 70 years!  That's right, 70 years!!  Located in Rutherford, NY, Dr. Lee Frost took over the practice from his father 38 years ago, and has faithfully...  Read More
Senior Technical Advisor at Keating Dental Lab
On this episode of the Dental Up Podcast, we discuss with Barry McGinnis the Senior Technical Advisor at Keating Dental Lab, some of the most common issues he sees with fixed crown and bridge cases.  We highlight prep design, impression taking,  and interocclusal clearance, and what to look for in...  Read More
Fight On! With Dr. Robert Freitas
On this episode of the Dental Up Podcast, we welcome Dr. Robert Freitas from Brentwood, CA, founder and owner of Freitas Dentistry.   Dr. Freitas attended the University of Southern California (Fight On!) for his Dental School education.  He returned to Northern California after graduation in...  Read More
Digital dentistry at the Chico VA with Dr. Ginger Chan
On this episode of the Dental Up Podcast, we welcome Dr. Ginger Chan from the Chico California Veterans Administration dental clinic.   Dr. Chan attended the University of California, Berkeley for her undergrad education, before moving on to the University of California, San Francisco for her...  Read More
Should You Buy a CEREC Machine (Dental Milling Machine)? | The Dental SEO Experts
Over  wear dental crowns to cover broken or decaying teeth, making them one of the most popular dental procedures in the country. As a dentist, you probably already knew this, but have you considered how you make the administrative side of the process smoother? This can be done with a Chairside...  Read More
Putting the Patient First, with Dr. Don Fowkes
On this episode of the Dental Up Podcast, we welcome back to the podcast Dr. Don Fowkes! Having done over 60,000 restorations with Keating Dental Lab, Dr. Fowkes is back to share his knowledge, expertise, and stories with the Dental Up crowd. Be sure to check out the first time he was on by...  Read More
Adventures with the Military and Beyond with Dr. Deanna Thomas
On this episode of the Dental Up Podcast we welcome back to the podcast Dr. Deanna Thomas! Deanna Thomas, DMD, graduated from Penn State University with her BS before going on to the University of Pittsburgh School of Dental Medicine for her dental degree. Dr. Thomas went on to serve in the U.S....  Read More
How to dispose or donate dental equipment properly
This guide is a summary from our . It entails avenues and means in which to dispose of your equipment efficiently and responsibly.   Donate your dental or medical equipment directly to a qualified scheduled 501 c organization or charity. Choose a charity that can help determine the fair market...  Read More
A New Era in Digital Implant Dentistry: Scan Bodies with KDL's Digital Implant Specialist, Bernie Rico
On this episode of the Dental Up Podcast, we interview Bernie Rico, Keating Dental Lab's very own Digital Implant Specialist. Bernie has been with Keating Dental Lab for 16 years now, and has been the Digital Implant Specialist for 10. He started his career with Keating Dental Lab in the Plaster...  Read More
Transitioning to a Private Practice with Dr. Stephanie Price
On this episode of the Dental Up Podcast, we interview the esteemed Dr. Stephanie Price. After serving 12 years in the army, Dr. Price went on to study at the University of North Carolina School of Dentistry Chapel Hill, where she graduated from in 2013. She has been practicing dentistry for at...  Read More
(4) Top Used Dental Equipment That Maintains Its Value
Value is a complex concept; it's also a relative term. However, there are many ways to determine the value of dental equipment. When deciding to purchase dental equipment, several factors are essential. One of those is the depreciation value of the product. The faster something depreciates, the...  Read More
The Patient First Podcast Episode 37: A Closer Look At Clean And Boost With Dr. Michael Miyasaki - Upgrade Dental 2nd Opinion
Today's market is full of innovative products that help make dentists' jobs eaiser. But the question is which products are right for you? Which products guarantee 100% satisfaction? Are the ones you're using right now the most up to date? In this episode, Dr. Bryan Laskin talks with Dr. Mike...  Read More
Digital Imaging and CAD/CAM for Dental Restorations
Digital Imaging & CAD/CAM for Dental Restorations Dr Samaras is a graduate of Tufts University School of Dental Medicine and has practiced Dentistry for 40 years. For 9 years he served on the faculty at Tufts Dental as The Director of Practice Management and Associate Clinical Professor. He is...  Read More
Keating Dental Lab Presents: Removable Department Manager and Senior Technician, Jim McEachern
With over 50 years of experience as a Lab Technician, Keating Dental Lab's very own Removable Department Manager, Jim McEachern, shares the incredible journey of his career with the Dental Up Podcast. Originally from Boston, Jim's family moved to California when he was 4, and since then he's...  Read More
Digital Dentistry in 2022
Digital Dentistry in 2022 Dr. Ahmad Al-Hassiny is a global leader in digital dentistry and intraoral scanners, carrying out lectures as a KOL for many companies and industry. He is one of the few in the world who owns and has tested all mainstream scanners and CAD/CAM systems in his clinic. Dr....  Read More
Digital Impressioning with Keating Dental Lab's Dean Tassey
In this episode of The Dental Up Podcast, we meet Keating Dental Lab's very own CAD/CAM Manager, Dean Tassey. Dean's career in the dental industry started when he was 14, working with his dad who is a dentist. He continued there through college, until he began working at his first lab, Keating...  Read More
Categories: CAD-CAM
Displaying 26-50 of 134
1 2 3 4 5
Page 2 of 6
Total Blog Activity
997
Total Bloggers
13,451
Total Blog Posts
4,671
Total Podcasts
1,788
Total Videos
Sponsors
Townie Perks
Townie® Poll
Do you do more or less endo procedures since you started practicing?
  
The Dentaltown Team, Farran Media Support
Phone: +1-480-445-9710
Email: support@dentaltown.com
©2025 Dentaltown, a division of Farran Media • All Rights Reserved
9633 S. 48th Street Suite 200 • Phoenix, AZ 85044 • Phone:+1-480-598-0001 • Fax:+1-480-598-3450