KOMET New Carbide Crown Prepping Instruments

To be introduced during 2007 Greater New York Dental Meeting
Posted: October 26, 2007
Komet Carbide Crown Prepping Instrument (WinCE).jpg
New Carbide Crown Prepping Instruments to be Introduced During
2007 Greater New York Dental Meeting
 
Rock Hill, SC – October 24, 2007 – According to Donald Alexander from KOMET USA, the Carbide Crown Prepping Instruments are superior to previous prepping instruments because they allow for precise and controlled tooth reduction while providing a finished surface comparable to that achieved by using a diamond finisher.
 
KOMET USA will introduce its new Carbide Crown Prepping Instruments during the 2007 Greater New York Dental Meeting in New York City.
 
Designed by Donald J. Alexander, DDS, of Jacksonville, FL, the instruments provide real quick and smooth chatter free cut patterns.  The residual finish allows for both gross and finish work to be accomplished using the same instrument.  The flat-ended bur H837KRU – available in two sizes – is ideally designed for crown preparations that use a porcelain-butt margin.  The round-ended bur H881U is more suited to create a chamfer for Alumina or Zirconia CAD/CAM copings.
 
The cutting surface of both forms of the Carbide Crown Prepping Instruments are the same as KOMET USA’s H4MCL bur which has a special D-toothing for quick and efficient cutting of crowns and bridges made of conventional metal alloys.  Because of the cylindrical form of the new Carbide Crown Prepping Instruments, the cutting depth is a known quantity removing the need for depth grooves, with a cutting depth of 1.2 mm for the parallel chamfer form H881U.FG.012, a cutting depth of 1.4 mm for the modified parallel shoulder H837KRU.FG.014 and 1.6 mm for H837KRU.FG.016.  Also, the tips were engineered to match up precisely with the required chamfer or shoulder prep design depending on the desired material.
 
The instruments allow for a fast and precise controlled tooth reduction resulting in a finished surface much better than one completed with a super coarse diamond instrument.  The finish left by these prepping instruments is so good; that there is no need for an additional finishing instrument.
 
The Greater New York Dental Meeting will be held Nov. 23 through 28, 2007 at the Jacob K. Javits Convention Hall in New York, NY.  The Exhibit Hall will be open from Nov. 25 through 28.  The new Carbide Crown Prepping Instruments will be for sale at the show. Please visit KOMET USA at Booth #436.
 
About KOMET USA
KOMET is the recognized worldwide leader in the production of highly specialized and precise dental rotary instruments.  KOMET operates in the United States under the name KOMET USA, and sells direct to practitioners and dental laboratories.  The Company’s U.S. headquarters is located in Rock Hill, South Carolina.  For more information about KOMET USA and the Carbide Crown Prepping Instruments, please call 800-208-1630 or visit http://www.komet-usa.com.
Views: 28
Sponsors
Townie Perks
Townie® Poll
Do you do more or less endo procedures since you started practicing?
  
The Dentaltown Team, Farran Media Support
Phone: +1-480-445-9710
Email: support@dentaltown.com
©2025 Dentaltown, a division of Farran Media • All Rights Reserved
9633 S. 48th Street Suite 200 • Phoenix, AZ 85044 • Phone:+1-480-598-0001 • Fax:+1-480-598-3450