BlogPosts

Category:
Posted 5/25/2018 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 1123
1029 Oral Scanners, Clear Aligners & CAD/CAM with Lars Christian Lund, Vice President, Corporate Business Development & Marketing at 3Shape : Dentistry Uncensored with Howard Farran
Lars Christian Lund is the Vice President Corporate Business Development & Marketing of 3Shape, a developer of 3D scanners and CAD/CAM software solutions for the dental and audio industries. An experienced med-tech VP with over 10 years executive management experience from market leading...  Read More
Posted 11/8/2016 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 163
564 A Friend of Flem with Mark Fleming : Dentistry Uncensored with Howard Farran
Watch Video here                                    VIDEO - DUwHF #564 - Mark Fleming                        Stream Audio here                                    AUDIO - DUwHF #564 - Mark Fleming                        Mark J. Fleming, D.D.S. is a 1978 graduate of The Ohio State University College...  Read More
Posted 5/6/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 221
Common Errors that Occur During Digital Impression Procedures Using In-office CAD/CAM CEREC AC Systems
The intraoral scanner was invented to rectify quality deficiencies associated with manual production of traditional, hand-produced dental impressions and dental restorations1. Yet, a study by Kim et al. addresses common errors made with in-office CAD/CAM CEREC AC systems that affect the accuracy of...  Read More
Posted 3/10/2016 by saibb in The Passionate Dentist   |  Comments: 0  |   Views: 135
047 Dr. B Interviews Angela Severance of NINJA™ Dentistry
Tune in every week for more episodes. Visit.comAngela Severanceis a national speaker, educator and author with over 15 years of clinical experience specializing in digital dentistry and CAD CAM technology along with...  Read More
Posted 12/24/2015 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 394
267 Digital Masters with Doug Schulz : Dentistry Uncensored with Howard Farran
Stream Audio here: AUDIO - HSP #267 - Doug Schulz Watch Video here: VIDEO - HSP #267 - Doug Schulz • Dr. Schulz' early adoption of CAD-CAM• How Cerec has evolved•...  Read More
Posted 12/16/2015 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 343
Trinia CAD/CAM Discs and Blocks - An Ultralight Alternative to Metal Substructures
Trinia, a CAD/CAM fiber-reinforced composite, was first introduced in 2010 and has achieved remarkable clinical success and acceptance among dental professionals worldwide. With the growing demand for alternatives to metal substructures in dentistry, Trinia CAD/CAM blocks and discs are the new...  Read More
Posted 10/6/2015 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 734
Advantages of CAD/CAM Custom Abutments in Implant Dentistry
The use of CAD/CAM (computer-aided design/computer-aided manufacturing) technology to design and manufacture custom implant abutments is a highly predictable and reliable fabrication process; demonstrating survival rates comparable to conventionally fabricated abutments2. The latest generation of...  Read More
Posted 9/15/2015 by doctormuresan in AnaMaria Muresan DMD: My Clinical Experiences   |  Comments: 0  |   Views: 327
Just as before, these restorations were scanned and milled in a single appointment. Teeth #30 and 31 were prepared, scanned, designed, and milled using a TS150chairside mill and aBruxZirNOW milling block in about 40 minutes without the need to bake or glaze afterwards. They had accurate fitting...  Read More
Posted 9/11/2015 by doctormuresan in AnaMaria Muresan DMD: My Clinical Experiences   |  Comments: 0  |   Views: 472
In a single appointment, tooth #30 was prepared. Then, it was scanned and the crown was designedand milled using a TS150chairside mill and aBruxZirNOW milling block in about 40 minutes. It had accurate fitting without silicone impression or temporization, and no occlusal or interproximaladjustments...  Read More
Posted 7/31/2015 by CAD/CAM HERO LLC in Used CEREC® Roundup   |  Comments: 0  |   Views: 1066
How to Find Out the “Milleage” on Your CEREC Milling Unit
Why you need to know this:Without a doubt, the singlemost important selling point of any CEREC mill is its “milleage”. This is the number of mills a CEREC has performed. Similar to the mileage on cars, the milleage on CERECsgives buyersan idea of how muchuseful life is left on the...  Read More
Posted 7/25/2015 by CAD/CAM HERO LLC in Used CEREC® Roundup   |  Comments: 0  |   Views: 2203
Read This Before You Buy a Used CEREC
Why You Should Read ThisIn my previous blog, I covered the reasons why anyone thinking about incorporating CEREC into their practiceshould strongly consider buying used. In case you missed it, you can find that post .This post will guide you through theused CEREC marketplace and, much like a...  Read More
Posted 6/8/2015 by skegen in Two Tips for a Perfect STL Registration for the Maxilla   |  Comments: 0  |   Views: 179
Two Tips for a Perfect STL Registration for the Maxilla
The following two tips (one old, one new) will permit a very accurate STL registration for the maxilla in almost all cases, including when all the teeth contain metals (scatter):- Cotton rolls between the teeth (upper and lower jaw)- The tongue retracted to the back, not touching the palate (during...  Read More
Posted 4/23/2015 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 2  |   Views: 1059
Why I CBCT Everyone with Dr. Neal Patel : Howard Speaks Podcast #67
Stream Audio Here: HSP #67 with Neal Patel audio Watch Video Here: HSP #67 with Neal Patel video "I scan ALL MY PATIENTS" --Dr. Neal Patel. Listen as he explains exactly what is so...  Read More
Posted 4/1/2015 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 707
cerecdoctors.com with Dr. Sameer Puri : Howard Speaks Podcast #61
Dr. Sameer Puri and Dr. Tarun Agarwal (T-Bone) are the only business partners Dr. Howard Farran has ever had. When the idea of an annual Dentaltown meeting was proposed, Sameer and T-bone volunteered to get the meeting up and running on a handshake. Since then Sameer has founded cerecdoctors.com...  Read More
Posted 12/10/2014 by Howard Goldstein in Dentaltown Learning Online   |  Comments: 0  |   Views: 99
Dentaltown Learning Online....Latest Tooth Replacement Techniques with Cerec. Recorded Live at Townie Meeting 2014!
Dentaltown Learning Online is pleased to present online "Latest Tooth Replacement Techniques with Cerec." Recorded Live at Townie Meeting 2014! by Dr. Michael Skramstad.This CE course can be found here...?Discussion of this course can be found here..This presentation will cover the discuss advanced...  Read More
Posted 10/8/2014 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 571
Incomparable Control through CAD-CAM with Dr. Mike Kelliher : Howard Speaks Podcast #11
Dr. Howard Farran and Dr. Mike Kelliher talk about the impact of CAD/CAM dentistry in the general practice.Audio Podcast: Howard Speaks Audio Podcast #11 with Dr. Mike Kelliher Video Podcast: Howard Speaks...  Read More
Posted 10/1/2014 by dunnmktg in The Dunn Show   |  Comments: 0  |   Views: 285
What is Digital Dentistry?
The term “digital dentistry” has gained much popularity during the last several years. Its use now is ubiquitous. However, the concept of “digitizing” a dental practice means different things to different people. And there are no "incorrect" ways to convert a dental practice...  Read More
Posted 5/15/2014 by Strobel Dentistry in Strobel Dentistry Blog   |  Comments: 0  |   Views: 2966
The Newest Addition to the Strobel Family!
Look at it! Isn’t it precious? Alright, so it’s not an adorable baby (though stay tuned, there are bundles of joy on their way for some of the Strobel Dentistry staff!), and many of you likely don’t get as stoked as we do by new dental equipment. But we could not be more excited...  Read More
Posted 4/22/2013 by EcoDentistry in The Green Zone   |  Comments: 0  |   Views: 6946
Happy Earth Day!
Happy Earth Day Townies!In celebration, we've compiled 10 super simple ways for your dental practice to go green. If you're interested in how being green can jumpstart your practice, take a look at EDA Co-Founder on The Wellness Hour with Randy Alvarez:Are you excited yet?Just today, for Earth Day,...  Read More
Posted 4/11/2013 by andyblauig in What's new at Sirona?   |  Comments: 0  |   Views: 6440
Sirona at IDS 2013: Wibke Halfar introduces you to CEREC Software 4.2
The best restorations are the result of teamwork between yourexpertise and our software. The CEREC software is tailored exactly tothe requirements of dental professionals following many years ofdevelopment experience. Using the new intuitive user interface of ,you do not require any special...  Read More
Posted 4/1/2013 by EcoDentistry in The Green Zone   |  Comments: 0  |   Views: 609
Learn, Connect & Change the World at the Green Dentistry Conference!
We couldn’t be more thrilled to invite our readers at Dental Town to spend a relaxing and engaging weekend at the industry’s first ever Green Dentistry Conference devoted exclusively to high-tech, environmentally sound dental practices.The Green Dentistry Conference will be held May 3rd...  Read More

Total Blog Activity

629
Total Bloggers
8,687
Total Blog Posts
2,420
Total Podcasts
1,104
Total Videos

Sponsors

Townie Perks

Townie® Poll

Which aspect of practice management is most challenging for you?



  

Site Help

Sally Gross, Member Services
Phone: +1-480-445-9710
Email: sally@farranmedia.com

Follow Dentaltown

Mobile App

WITH DENTALTOWN . . . NO DENTIST WILL EVER HAVE TO PRACTICE SOLO AGAIN®

WWW.DENTALTOWN.COM - WHERE THE DENTAL COMMUNITY LIVES®

9633 S. 48th Street Suite 200 • Phoenix, AZ 85044 · Phone: +1-480-598-0001 · Fax: +1-480-598-3450
©1999-2018 Dentaltown, L.L.C., a division of Farran Media, L.L.C. · All Rights Reserved