This electronically delivered self-instructional program is designated for 2 hours of CE credit by Farran Media.
AGD Code: 615.
The fee to view this course is $36. This cost includes the fee to take the exam and claim your CE credits.
The fee to view the entire series is $225. There is an additional fee of $225 to take all exams and claim CE credits for this series.
The placement and restoration of single posterior implants utilizing cone beam and CAD/CAM technology is “state of the art now”. As the demand for implant services continues to increase, digital technology allows us to place and restore implants with greater predictability, functionality and better esthetics. As more general dentists are offering implant services, this technology can set you apart from the competition by allowing you to provide your patients simpler, time saving, cost effective implant solutions. Recorded Live at Townie Meeting 2014!
Description of Speaker:
Dr. Scott Sauer has been a dentist supported by Pacific Dental Services (PDS) since 2009 and became an owner doctor with PDS in 2010. Dr. Sauer graduated from Baylor College of Dentistry in 1990. He taught CEREC at Dentistry by Design in San Diego, California, from 2005 to 2008 and Texas A&M University Baylor College of Dentistry in Dallas, Texas, from 2009 to 2011. Dr. Sauer currently teaches CEREC and case acceptance for PDS. He was a fellow and accredited member of the Academy of CAD/CAM dentistry, and was also a case examiner for the Accreditation Board of the Academy of CAD/CAM Dentistry. Dr. Sauer is the president of the Texas Regional Dental Advisory Board and a member of the National Dental Advisory Board for PDS. He is also a member of the Spear Center Faculty Club. Dr. Sauer has been married for 27 years to his wife, Kim, and they have three grown children.
Upon completion of this course, participants should be able to achieve the following:
- The economic advantage of implants vs. bridges
- How to use CBCT and CAD/CAM technology to place surgically guided implants whose position has been restoratively predetermined
- How to use CAD/CAM technology to quickly and economically produce screw retained crowns
- How to use CAD/CAM technology to produce custom abutments with cementable crowns
The speaker declares that neither he nor any member of his family have a financial arrangement or affiliation with any corporate organization offering financial support or grant monies for this continuing education program. Although commercially available products are discussed, no financial arrangements exist between the manufacturers and the speaker.
|Approved PACE Program Provider|
FAGD / MAGD Credit
Approval does not imply acceptance by a state or
provincial board of dentistry or AGD endorsement.
1/1/2016 to 12/31/2018
Provider ID# 304396
|Farran Media is an ADA CERP Recognized Provider.|
ADA CERP is a service of the American Dental Association to assist dental professionals in identifying quality providers of continuing dental education. ADA CERP does not approve or endorse individual courses or instructors, nor does it imply acceptance of credit hours by boards of dentistry.
|This activity meets the educational criteria required for verifiable Continuing Professional Development under the General Dental Council Lifelong Learning scheme and represents 2 hours of verifiable CPD.|
The CE provider (Farran Media) uses reasonable care in selecting and
providing content that is accurate. The CE provider, however, does not
independently verify the content or materials. The CE provider does not
represent that the instructional materials are error-free or that the content
or materials are comprehensive. Any opinions expressed in the materials are
those of the author of the materials and not the CE provider. Completing one or
more continuing education courses does not provide sufficient information to
qualify the participant as an expert in the field related to the course topic
or in any specific technique or procedure. The instructional materials are
intended to supplement, but are not a substitute for, the knowledge, expertise,
skill and judgment of a trained health care professional.
Continuing education credits issued for completion of online CE courses may not apply toward
license renewal in all licensing jurisdictions. It is the responsibility of each registrant
to verify the CE requirements of his/her licensing or regulatory agency.
to see a list of computer requirements before taking the course.
State CE Requirements:
for CE requirements by state. Please note that this information is current as of the time of listing. This information is subject to change at any time from the state boards. For the most up-to-date information, please contact your state board directly.
There are no refunds for Online CE courses. Please contact technical support if you run into technical difficulty.
For any questions, please contact Howard Goldstein, DMD, Director of Continuing Education
To reap the full benefits of this CE course, the presenters (Howie Horrocks and Mark Dilatush)
have agreed to create a marketing plan specifically tailored to your practice and your specific market area.
Having your marketing plan printed and open while you view the course material,
will greatly individualize your learning experience.