select
 

BlogPosts

Errors:
Posted 8/22/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 44
Dentistry in Demand
According to the American Academy of Cosmetic Dentistry in the US, around 99% people believe that a smile is the most important social asset. The desire to have straight teeth has put braces on 80 percentof the teenagers in the United States. The American Academy of Orthodontics conducted a...Read More
Posted 7/27/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 1  |   Views: 87
Ensuring a Successful Transition to Digital Dentistry
More dentists than ever are switching to digital scanners as a replacement to traditional impressions. Has your transition into digital dentistry been problematic? Are you thinking about giving up conventional impressions, and are curious to see what digital dentistry has to offer? Here are a few...Read More
Posted 6/27/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 62
Staying relevant within the ever-increasing changes in dental technology
We can no longer assume technology is a fad—it has become an integral part of the modern dental practice. Technology isn't just a marketing tool used solely for drawing in new patients, as advances in technology have improved the way patients are treated. Digital dentistry is essential when...Read More
Posted 6/6/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 103
Iverson Dental Labs - What sets us apart
Iverson Dental Labs is a leading edge dental laboratory and believes in keeping up with the latest dental technologies and techniques to provide the best experience for dentists and their patients. We are constantly evolving to reduce costs, improve customer service and enhance dental prosthetics....Read More
Posted 5/6/2016 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 147
Common Errors that Occur During Digital Impression Procedures Using In-office CAD/CAM CEREC AC Systems
The intraoral scanner was invented to rectify quality deficiencies associated with manual production of traditional, hand-produced dental impressions and dental restorations1. Yet, a study by Kim et al. addresses common errors made with in-office CAD/CAM CEREC AC systems that affect the accuracy of...Read More
Posted 3/11/2016 by saibb in The Passionate Dentist   |  Comments: 0  |   Views: 78
048: Dr. B Interviews Dr. Lorne Lavine, The Digital Dentist
The Real Episode 48 - Dr. Lorne Lavine, The Digital Dentist Tune in every week for more episodes. Visit.com Dr. Lorne Lavine, a former periodontist, is known as the leading authority on technology in the...Read More
Posted 3/10/2016 by saibb in The Passionate Dentist   |  Comments: 0  |   Views: 81
047 Dr. B Interviews Angela Severance of NINJA™ Dentistry
Tune in every week for more episodes. Visit.com Angela Severanceis a national speaker, educator and author with over 15 years of clinical experience specializing in digital dentistry...Read More
Posted 1/29/2016 by KDA Creative in Dental Up-Video+Podcasts+News   |  Comments: 0  |   Views: 275
3M True Definition Digital Scanner Workflow Video Tutorial
In this digital scanner workflow video Dr. Hornbrook takes you through the 3M True Definition system workflow after you take your digital scans and are in the process of sending them to your dental laboratory. The 3M Digital Scanner has an smooth workflow designed for the clinician, and with the...Read More
Posted 1/29/2016 by KDA Creative in Dental Up-Video+Podcasts+News   |  Comments: 0  |   Views: 124
3M Digital Scanner Video Tutorial (Dr. David Hornbook)
http:///digital Today, we are going to utilize the True Def from 3M digital scanner to fabricate an all ceramic crown on Kim, our patient, maxillary left canine. We're actually going to do it modulus, which is very cool, so it's going to be a virtual impression. I'll go ahead and scan it,...Read More
Posted 1/29/2016 by KDA Creative in Dental Up-Video+Podcasts+News   |  Comments: 0  |   Views: 146
3M Digital Scanner Zirconia Crown Seating (Dr. David Hornbook)
We're back for our second visit with Kim, and as you recall, we took a digital impression for the maxillary left canine. The nice thing about digital is our ability to actually blow up the margin, see it visually, then this gets modemed to the laboratory and then they basically make a...Read More
Posted 10/6/2015 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 510
Advantages of CAD/CAM Custom Abutments in Implant Dentistry
The use of CAD/CAM (computer-aided design/computer-aided manufacturing) technology to design and manufacture custom implant abutments is a highly predictable and reliable fabrication process; demonstrating survival rates comparable to conventionally fabricated abutments2. The latest generation of...Read More
Posted 10/2/2015 by ConversionWhale in Conversion Whale - Leader in Dental Practice Marketing   |  Comments: 0  |   Views: 124
Testimonial Videos - A Different Approach to Customer Reviews
Over 88% of consumers look at online reviews to help them make their mind up about a product or service, this is specially the case when it comes to choosing health care providers. There are many sites like Yelp, Facebook and Google+ that display ratings and comments from past customers that share...Read More
Posted 8/31/2015 by IversonDental in Digital Dentistry Laboratories   |  Comments: 0  |   Views: 1384
Pros and Cons of IPS e.max® Lithium Disilicate Glass-Ceramics for Dental Restorations
For more than a decade, clinical trials have recorded high chipping rates in porcelain fused to zirconia (PFZ) dental restorations because of the relatively weak bond between the porcelain veneer and strong zirconia core. Porcelain fused to metal (PFM) dental restorations experience veneer...Read More
Posted 7/31/2015 by CAD/CAM HERO LLC in Used CEREC® Roundup   |  Comments: 0  |   Views: 820
How to Find Out the “Milleage” on Your CEREC Milling Unit
Why you need to know this: Without a doubt, the singlemost important selling point of any CEREC mill is its “milleage”. This is the number of mills a CEREC has performed. Similar to the mileage on cars, the milleage on CERECsgives buyersan idea of how muchuseful life is left on the...Read More
Posted 7/30/2015 by howard in Dentistry Uncensored with Howard Farran   |  Comments: 0  |   Views: 395
Digital Dentistry Is Here To Stay with Frank Lauciello : Howard Speaks Podcast #109
Listen to Dr. Frank Lauciello's insights into the changes in the industry. Digital is here to stay, maybe you should get on board. Stream Audio here: AUDIO - Frank Lauciello - HSP #109 Watch...Read More
Posted 7/25/2015 by CAD/CAM HERO LLC in Used CEREC® Roundup   |  Comments: 0  |   Views: 1889
Read This Before You Buy a Used CEREC
Why You Should Read This In my previous blog, I covered the reasons why anyone thinking about incorporating CEREC into their practiceshould strongly consider buying used. In case you missed it, you can find that post .This post will guide you through theused CEREC marketplace and, much like a...Read More
Posted 7/23/2015 by CAD/CAM HERO LLC in Used CEREC® Roundup   |  Comments: 0  |   Views: 858
Considering CEREC? Why You Should Buy Used
Just like when you buy that cute (and expensive) Teacup Poodleat the pet shop and promise to love and care for it forever and ever. Someday when the cuteness effectswear off, the frustration from its refusal to potty train, constant barking and tearing up your expensive furniture and favorite...Read More
Posted 6/26/2015 by KDA Creative in Dental Up-Video+Podcasts+News   |  Comments: 0  |   Views: 267
|4K ULTRA HD|-- Digital Dental Lab tour with-- |Shaun Keating CDT|
Keating Dental Arts very own "Shaun Keating" takes you through a Digital 4K Ultra HD tour of the high end and cutting edge Dental Lab in Irvine California. Learn More about Keating Dental Arts™ (state of the art dental lab facility) in Irvine California: For More 4K ULTRA HD Video and...Read More
Posted 8/3/2014 by dunnmktg in The Dunn Show   |  Comments: 1  |   Views: 5161
A (3D) Printer in Every Practice?
Note: This article was originally posted on on September 2, 2013. Some cutting edge dental laboratories have adopted 3D printing technology to improve efficiency and production accuracy. These printers can be used to replace the traditional process for fabricating models out of stone or...Read More
Posted 2/24/2014 by tgriffith in The Gold Standard   |  Comments: 1  |   Views: 4732
Are you in business to spend money or make it? That seems like a question with an obvious answer but dentists are getting so wrapped up in technology that they are forgetting. Yes, you want to help people and you take pride in offering the best care and service for your patients. But why do...Read More
Posted 11/15/2013 by Keaton Marks in "Own The Phone"   |  Comments: 0  |   Views: 6931
What Dr. Farran taught me about Case Presentation at the ADA Conference
First things first: I would like to share how entertaining and exciting it was to hear Dr. Farran speak! Watching him control the room was an absolute blast. The entire room was laughing hysterically while he was sharing. I loved it. I had heard him speak once before on Dental Doc Talk Radio with...Read More
Posted 8/30/2013 by Jill Kring Carter aka Practice Prudence™ in Practice Prudence ™   |  Comments: 0  |   Views: 6378
What's Good For The Patient Is Still Good For Business
Our general dentist continues to do well in this time of continuing economic crisis that causes many to put dental care on the back burner behind more pressing needs like mortgage payments, car repair bills, groceries, etc. He considers all the cards with his patients - what's best for them and how...Read More
Posted 6/27/2013 by andyblauig in What's new at Sirona?   |  Comments: 0  |   Views: 277
SICAT excites with a new software application at the IDS 2013
SICAT was happy to welcome numerous enthusiastic and interested visitors during the IDS 2013. The newly introduced software application SICAT Function received incredible positive feedback. This new software further extends SICAT’s line of 3D planning software into the specialty...Read More
Posted 4/11/2013 by andyblauig in What's new at Sirona?   |  Comments: 0  |   Views: 6420
Sirona at IDS 2013: Wibke Halfar introduces you to CEREC Software 4.2
The best restorations are the result of teamwork between your expertise and our software. The CEREC software is tailored exactly to the requirements of dental professionals following many years of development experience. Using the new intuitive user interface of , you do not require any...Read More

Total Blog Activity

710
Total Bloggers
6,861
Total Blog Posts
1,599
Total Podcasts
768
Total Videos

Popular Categories

Sponsors

Townie Perks

Townie® Poll

Do you have a dedicated human resources generalist in the office?
  

Connect with Us

Download our Apps
Follow Dentaltown
Follow Howard Farran
Follow Townie Meeting
WITH DENTALTOWN . . . NO DENTIST WILL EVER HAVE TO PRACTICE SOLO AGAIN®

WWW.DENTALTOWN.COM - WHERE THE DENTAL COMMUNITY LIVES®

©1999-2017 Dentaltown, L.L.C., a division of Farran Media, L.L.C. · All Rights Reserved
9633 S. 48th Street Suite 200 • Phoenix, AZ 85044 · Phone: +1-480-598-0001 · Fax: +1-480-598-3450
Email Administrator: lorie@dentaltown.com